Basecoats-Adhesives
![](https://backend.advancedfoam.com/wp-content/uploads/2020/11/DryBond_200x200.png)
DryBond – Is a high performance, dry blend, polymer-modified cement adhesive and base coat manufactured with high grade aggregates, cement and polymers.
- Packaged in moisture-resistant 50 lb. bags.
- Store in a cool dry place off the ground or concrete, out of direct sunlight, and protected from weather and other damage.
- Coverage may vary due to ambient and surface temperature, surface porosity, and application. The approximate coverage of DryBond is 80 to 90 square feet per bag.
- Mixing, Application, and Curing information on the package.
- Has a smoother surface than FoamTek 30.
- DryBond Data Sheet
![](https://backend.advancedfoam.com/wp-content/uploads/2020/11/FoamTek.jpeg)
FoamTek 30 – Is a cement-based polymer-modified base coat manufactured with 30 sand aggregates.
- Packaged in moisture-resistant 50lb. bags.
- Store in a cool dry place off the ground or concrete, out of direct sunlight, and protected from weather and other damage.
- Coverage may vary due to ambient and surface temperature, surface porosity, and application. The approximate coverage of Foamtek30 is 45 square feet per bag.
- Mixing, Application, and Curing information on the package.
- Foamtek30 has a rougher sand surface for a base coat.
- OmegaFoamTek Data Sheet
![](https://backend.advancedfoam.com/wp-content/uploads/2020/11/AkroFlex-Reinforcing-Mesh.jpeg)
Mesh – FN396 White PSA Foam Netting is a polypropylene material with adhesive backing.
- Stocked in two roll widths:
– 48″ x 150′ covers 600 square feet
– 16″ x 150′ covers 200 square feet
Store in cool dry area